subwoofer für 5Hz!!!!!!!

Alles was mit aktiven Lautsprechern zu tun hat, findet hier seinen Platz diskutiert zu werden

Moderator: Moderatorenteam

Antworten
Benutzeravatar
sme
Stammgast
Stammgast
Beiträge: 144
Registriert: Mi 13. Apr 2005, 10:42

subwoofer für 5Hz!!!!!!!

Beitrag von sme »

clickt ma auf das bild vom rotary-woofer!

irgendwie kommt mir das so vor als wenn das ernst gemeint ist......


http://www.eminent-tech.com/main.html
treiber: quad 22 / grant&lummley gl50
vorstufe: http://www.roehren-und-hoeren.de/phpBB/ ... .php?t=694
oswald
nicht mehr Neu
nicht mehr Neu
Beiträge: 712
Registriert: Sa 27. Mai 2006, 23:50

Re: subwoofer für 5Hz!!!!!!!

Beitrag von oswald »

sme hat geschrieben:clickt ma auf das bild vom rotary-woofer!

irgendwie kommt mir das so vor als wenn das ernst gemeint ist......


http://www.eminent-tech.com/main.html
darauf habe ich schon lange gewartet :roll:
oswald
Benutzeravatar
Thargor
Inventar
Inventar
Beiträge: 6205
Registriert: Fr 3. Dez 2004, 23:44
Wohnort: Kleines Kaff bei Hamburch

Beitrag von Thargor »

Hmmm... sieht aus wie der Lüfter vom Schlachter um die Ecke. Wusste gar nicht, dass der High-Ender ist...? :wink:
Viele Grüße von Guido, dem langsamsten Barkeeper der Welt! :drink:

Wann war Dein letztes Live-Konzert?
Benutzeravatar
boarder
Stammgast
Stammgast
Beiträge: 306
Registriert: Mo 13. Dez 2004, 22:50

Beitrag von boarder »

Lange nicht mehr so gelacht :lol: wat für ein Sch*** :cry:

Kostet ja auch nur 12900 USD die Turbine, mein Ventilator für 12,90 Eur ausm Baumarkt hat viel größere Rotorblätter und der geht bis 3hz runter, WOW : hail
[IMG:240:320]http://img123.imageshack.us/img123/4656 ... tor1oj.jpg[/img]
So ein ding in alle vier Ecken des Raumes, auf den Hörplatz ausgerichtet und es geht richtig zur Sache : resp und Anerkennung !!!
Viele Grüße,
boarder
Benutzeravatar
SDJungle
nicht mehr Neu
nicht mehr Neu
Beiträge: 917
Registriert: Sa 5. Feb 2005, 23:17
Wohnort: Lüdenscheid

Beitrag von SDJungle »

Jungs, lest mal die Specs genauer... :lol:
Das Ding ist ein sogenannter Stellpropeller, der Stellwinkel der Flügelräder wird dem Musiksignal entsprechend verändert. Das Teil ist allerdings weniger für Hifi gedacht, eher für Kinos z. B. . Die 5Hz sind ja ausserdem ein eher rein akademischer Wert - womit will man die aufzeichnen wenn es nicht gerade ein künstlich erzeugter Ton ist?
Es gab übrigens im Car-Hifibereich schonmal einen ähnlichen Subwoofer von Sinus Live. Dort hat man eine Arc Archimedes-Schraube benutzt und nur die Drehrichtung dem Signal entsprechend geändert.
groovemasterj
Neuling
Neuling
Beiträge: 2
Registriert: Sa 9. Sep 2006, 06:44

Beitrag von groovemasterj »

ob ihr´s glaubt oder nicht,
ich hab´schon von leuten gehört, die sich solche teile in das fundament ihrer häuser einbauen und somit den ganzen keller zum bassreflektor machen. ich frag´aber nochmal nach, ist glaub´ich noch im versuchsstadium.
viele grüße
jan
Benutzeravatar
Thargor
Inventar
Inventar
Beiträge: 6205
Registriert: Fr 3. Dez 2004, 23:44
Wohnort: Kleines Kaff bei Hamburch

Beitrag von Thargor »

Nö, das Ding ist schon lange im Betrieb. Finde nur gerade den Link nicht..... :idn:
Viele Grüße von Guido, dem langsamsten Barkeeper der Welt! :drink:

Wann war Dein letztes Live-Konzert?
Benutzeravatar
Jesse
nicht mehr Neu
nicht mehr Neu
Beiträge: 507
Registriert: Mo 17. Jul 2006, 14:32
Wohnort: Krefeld

Beitrag von Jesse »

Moin Leuts,

finde ich überhaupt keine uninteressante Idee, gerade für Filmeffekte. :sw

Die Wirkung auf die Zuschauer könnte auch interessant sein. :konf2 :lol:



Gruß
Gruß

Jesse 8) Good Vibration
Benutzeravatar
koifarm
Stammgast
Stammgast
Beiträge: 169
Registriert: Mi 19. Sep 2007, 12:00

Beitrag von koifarm »

Dieses Ding habe ich im Auto.

Phoenix Gold Cyclone. Spielt von 5 bis 30 Hz.
Dies ist ein subsonic woofor.

[img:264:200]http://www.ict-net.net/pgc.jpg[/img]
Benutzeravatar
Röhrchen
nicht mehr Neu
nicht mehr Neu
Beiträge: 707
Registriert: Di 18. Dez 2007, 19:19
Wohnort: Düsseldorf

Beitrag von Röhrchen »

koifarm hat geschrieben:Dieses Ding habe ich im Auto.

Phoenix Gold Cyclone. Spielt von 5 bis 30 Hz.
Dies ist ein subsonic woofor.

[img:264:200]http://www.ict-net.net/pgc.jpg[/img]

Hallo ,kannst Du mir noch ein paar Infos über den Sub geben :?:

Gruß
Holger
:beer
Benutzeravatar
waterl00
Alter Hase
Alter Hase
Beiträge: 2307
Registriert: So 31. Okt 2004, 12:14

Beitrag von waterl00 »

5, 15, 20 Hz?

Welches Instrument spielt denn tiefer als 30 Hz? Von einer dicken Kirchenorgel mal abgesehen, gibt's da nicht wirlich viel.
Benutzeravatar
Bender
Honourable Member of RuH-Society
Honourable Member of RuH-Society
Beiträge: 2493
Registriert: Do 27. Apr 2006, 11:49
Wohnort: Siegen

Beitrag von Bender »

Man bräuchte sich bei Subsonic jedenfalls keine Sorgen mehr um die Tieftöner machen, so ne Flatter steckt das sicher locker weg :mrgreen: :mrgreen: :mrgreen:

Gruss /// Ole
RuH e.V. Mitglied

I've got a secret, I've been hiding under my skin
My heart is human, my blood is boiling
My brain IBM
Benutzeravatar
koifarm
Stammgast
Stammgast
Beiträge: 169
Registriert: Mi 19. Sep 2007, 12:00

Beitrag von koifarm »

Ich habe nur weitere Info's im English.

The Cyclone is based on a revolutionary new technology that uses the rotational force of an unconventional moving-magnet system to drive a radiator directly. This new system converts low frequency signals into acoustical output without the physical limitations of conventional voice coils, cones, spiders, and surrounds. The result of this innovation is a subwoofer with ultra low distortion and 3 times the displacement of a conventional 12-inch subwoofer.

The moving voice coil subwoofer has undergone very few changes since the 1930's. Without taking into account the focus on new materials and construction techniques, today's designs still possess the same physical limitations they did 60 years ago. These limitations are evident when we call upon conventional subwoofers to properly reproduce low frequencies that are now common in modern recordings. Throughout the evolution of subwoofer design, certain compromises were necessary to overcome these physical limitations. The largest compromise involved the use of larger voice coils. Although larger voice coils increase excursion and power handling, they also add mass, lowering the efficiency. The cone and its affiliated suspension components also suffer from physical limitations in the cone's maximum allowable excursion. A fresh new approach to subwoofer design was deemed necessary in order to avoid these limitations and eliminate the compromises.

THE CONCEPT: The goal is sound quality. By that we mean sub-bass that sounds like it's coming from in front of the windshield; blends seamlessly with tight, fast mid-bass; and effortlessly reaches high volume levels.

GETTING THERE: The Cyclone is best thought of as a low frequency air pump. It is most at home when used with dedicated 6.5" to 8" mid-bass drivers. How the Cyclone interacts and blends with the mid-bass drivers is the key to great sound quality.

MID-BASS DRIVERS: Locate the mid-bass drivers in the front of the listening area; try the doors, kickpanel, etc. We strongly recommend having an enclosure for the mid-bass drivers and giving them all the power they can handle. In a Cyclone system, the mid-bass drivers give us our impression of SPL as well as the location of bass sounds within the listening environment.

THE BOX: Many experiments have concluded that the best box is a sealed box that shows the Cyclone 2.0 to 2.5 cu.ft. Remember that the Cyclone displaces .5 cu.ft. by itself. If the Cyclone will be inside the box, make it 2.5 to 3.0 cu.ft. If the motor is out of the box, make it 2.0 to 2.5 cu.ft. For rock, rap, or most other popular music, use the smaller size box. For the ultimate in smoothness and transient response, use the larger size box. You can mount the Cyclone at any angle either in the box or with the motor exposed. Build the box as strong as possible using MDF or better material. Line the box with a few inches of polyfil or other acoustical material.

THE AMP: We can't stress this enough, the Cyclone doesn't need a ton of power to do its job. That's one of the best things about it. It only needs about 150 watts continuous (300 peak) for full excursion @ 20Hz. Choose an amplifier with about 300 to 600 watts rated power bridged @ 4 ohms (remember that the Cyclone is an 8-ohm driver).

THE CROSSOVER: Use only active crossovers. Never use passive crossovers with the Cyclone. Use a steep (minimum 18dB per octave) crossover between the mid-bass drivers and Cyclone. The crossover point should be no higher than 60Hz. You may even go as low as 50Hz. The idea is to make it impossible to tell where the Cyclone is physically located. The only way to do this is to keep frequencies that can be localized (above 50 - 60Hz) out of the Cyclone.

SPECS FOR CYCLONE:
Frequency Response 11Hz to 60Hz
Nominal Impedance 8 Ohms
Continuous Power Handling 300 WRMS
Power Compression < 1.5dB @ full power @ 15 Minutes
Sensitivity 90dB 1W/1M
Maximum Excursion 38 Degrees p-p Linear Rotation
Required Crossover >18dB Per Octave, <60Hz
Mounting Depth 12 7/8"
Mounting Hole Diameter 11 1/8"
Speaker Displacement 0.5 cu.ft.

Bei mir spielt er bis 30 HZ und dan kommt eiene Lanzer 15"subwoofer von 30 bis 60 Hz danach zwei Boston Rally RS8 woofers von 60 bis 225Hz. Dass sind 4 lautsprecher nur fur denn bassbereich. So einen cyclone ist ein tolles erlebnis. Der auto wird formlich gefullt mit sound. Mann spurrt den bass bis in die knochen auch bei niedrige lautstarke.

Fur denn heimkino ist der cyclone auch ein toller spass.

Hier noch ein link zu dem orginal manual.

http://www.ict-net.net/cyclone.pdf
Benutzeravatar
Röhrchen
nicht mehr Neu
nicht mehr Neu
Beiträge: 707
Registriert: Di 18. Dez 2007, 19:19
Wohnort: Düsseldorf

Beitrag von Röhrchen »

waterl00 hat geschrieben:5, 15, 20 Hz?

Welches Instrument spielt denn tiefer als 30 Hz? Von einer dicken Kirchenorgel mal abgesehen, gibt's da nicht wirlich viel.
Hallo, da hast Du recht ... aber ein Heimkino :wink:
oder Musikrichtungen wie Dubstep, hier geht es bei 10Hz richtig ab :D

@koifarm Danke für die Infos :OK:

Gruß
Holger :beer
Antworten

Zurück zu „Aktive Lautsprecher“